Irrigation
Controller (Lithium battery-operated)
The controller
shall be a solid state irrigation controller powered lithium batteries.
The controller shall incorporate temperature budgeting “Smart
Water” technology for water conservation. The vandal and
water resistant controller is enclosed in a powder coated, commercial
grade metal enclosure. A stainless steel enclosure or pedestal
is also available to house said controller. The panel has an easy
to read display rated for high temperatures up to 158 degrees
Fahrenheit. The controller shall operate in an outdoor setting
(in extreme heat or cold) and power latching solenoid actuators.
The Smart Clock can operate valves up to 3,000 feet (6,000 foot
loop) with 12 gauge or 2,000 feet (4,000 foot loop) with 14 gauge
irrigation wire. If the SSPED Stainless Steel Pedestal is specified
then the galvanized pipe is not applicable.
SMART
CLOCK Features and Advantages:
- The only
battery or solar controller with temperature budgeting, “Smart
Water Technology”.
- Six stations
plus master valve.
- Up to
ten year battery life, batteries included.
- “Set
it, don’t sweat it”® user friendly programming.
- 2000 foot
valve operating distance with 14 gauge wire, 3,000 feet with
12 gauge wire.
- Self-powered,
removable panel for programming at a convenient location.
- Four independent
programs, 4 starts per day per program.
- Automatic,
semi-automatic and timed manual operation.
- Valve
test function (invented by Alex-Tronix in 1977).
- Watering
based on days of the week or interval of days.
- Rain delay
function up to 99 days and rain switch ready.
- Watering
up to 23 hours and 59 minutes in one minute increments.
- Powder
coated outdoor metal case with lock. Pedestal mounting capability.
- Optional
stainless steel case or pedestal.
- Low battery
voltage indicator.
- Swing
out front panel with quick connect output terminal for easy
servicing with ample wiring space.
- Easy to
read high temperature rated liquid crystal display.
- Battery
operation virtually eliminates surge problems.
- Power
failure proof and electrically safe installation and troubleshooting.
- Pulsed
power eliminates burned out coils due to excessive voltage.
- Optional
latching relay operation of lights, pumps or other industrial
controls.
- Pulsed
DC current eliminates capacitive coupling problems associated
with AC powered systems and galvanic copper wire deterioration
of steady DC operation.
- 100% burned
in and functionally tested.
- Recognized
and sponsored by the U.S. Department of Energy for energy efficiency.
- Patent
Pending technology.
- Two year
warranty on controller and batteries.
Electrical
Specifications:
Electronics
current in idle state: 52 microamps
Electronics current while programming 4 milliamphours
Electronics power: 7200 milliamphours
Valve power: Three 9 volt lithium batteries in series, 1200 milliamphours
Mechanical Specifications:
Standard
and SSE Stainless Steel Enclosure size:
8.25 x 7.5 x 5.2 inches, 21.0 x 19.0 x 13.2 cm
Weight: 8.0 lb, 3.6 Kg
SSPED Stainless Steel Pedestal Size:
35.5 x 7.5 x 5.25 inches, (91 x 19 x 13 cm)
Weight: 23 lb (10.5 Kg)
|
